Garage, Shed & Hot Tub Concrete Pads in Stratford, Ontario

Concrete pad installation built for garages, sheds, hot tubs, workshops, and outdoor structures poured right, built to last.

Whether you're pouring a new garage floor, setting a solid base for a backyard shed, or installing a hot tub pad that can handle the weight, Stratford Concrete builds concrete pads that are properly prepped, correctly reinforced, and finished to perform. We serve Stratford and surrounding communities across Perth County — including St. Marys, Mitchell, Tavistock, New Hamburg, and Shakespeare.

Tell Us About Your Project

Garage Floor Pads | Shed Base Pads | Hot Tub Pads | Workshop & Equipment Pads | Detached Garage Slabs | Proper Base Prep

A Concrete Pad is Only as Strong as What Goes Underneath It

Most concrete pad failures don't start at the surface — they start below it. Soft soil, poor drainage, inadequate gravel depth, or a base that wasn't properly compacted will cause even a well-poured slab to crack, settle, or shift within a few seasons.
At Stratford Concrete, every garage floor, shed pad, hot tub base, and workshop slab starts with proper excavation, graded drainage, and a compacted gravel base built to handle the load above it. That's what separates a concrete pad that lasts 30 years from one that needs replacing in five.
We install concrete pads for garages, sheds, hot tubs, workshops, equipment areas, and backyard structures across Stratford, Perth County, and surrounding communities — including St. Marys, Mitchell, Tavistock, New Hamburg, and Shakespeare.
A large, freshly poured concrete shed pad sits flush against a dark brick house, featuring a smooth surface with a neatly tooled border around the edges

Concrete Pad Installation in Stratford, ON

Stratford Concrete installs garage floors, shed bases, hot tub pads, and workshop slabs for homes, rural properties, and businesses throughout Stratford and the surrounding area.

Black check mark icon on a white background

New garage slab installation

Black check mark on a white background

Shed pad installation

Black check mark on a white background

Hot tub pad installation

Black check mark on a white background

Workshop & equipment pads

Black check mark on a white background

Detached garage concrete floors

Black check mark on a white background

Outbuilding & structure bases

Black check mark on a white background

Grading, drainage, and base prep

Black check mark on a white background

Residential & commercial pads

Concrete Pad Replacement in Stratford

Old garage slabs and concrete pads don't just look worn — cracked, heaving, or uneven concrete becomes a structural problem for whatever sits on top of it, and a safety issue for anyone working around it.


Signs it's time to replace rather than patch:

  • Cracks that keep spreading or have significant vertical displacement
  • Sections that have sunk, settled, or heaved unevenly
  • Water pooling on the pad surface instead of draining off
  • A slab that no longer provides a level, stable base for the structure above it


We assess the existing base and drainage conditions first, then give you an honest recommendation on whether resurfacing is a practical option — or whether full removal and replacement is the better long-term investment.

Concrete Pad Additions & Extensions in Stratford

A lot of properties end up needing more than the original pad covered — a second bay added to an existing garage slab, a pad extension to accommodate a new hot tub beside an existing patio, or a proper base for a shed that's been sitting on gravel or bare ground for years.


Pad additions can help with:
✓ Extending an existing garage slab for a second vehicle or workspace
✓ Adding a hot tub pad that ties into an existing patio or deck area
✓ A proper concrete base for a shed that's currently on gravel or treated lumber
✓ Connecting a workshop pad to an existing driveway or apron
✓ Equipment pads added to an existing yard or farm layout
✓ A more finished, functional use of outdoor or rural property space
✓ A new section that ties into the existing concrete, not one that looks bolted on


We match the thickness, grade, and finish of any existing concrete so the addition reads as one continuous installation not two different projects poured years apart.

Concrete Pad Finish Options — Broom, Smooth & Trowel

For most garage floors and utility pads, a broom finish is the practical choice. It provides traction underfoot, handles vehicle and foot traffic well, and gives the surface a clean, professional appearance without adding unnecessary cost.


Finish options vary depending on the use of the pad. A smooth trowel finish works well for interior workshop slabs where you want an easy-to-clean surface. Outdoor hot tub pads and shed bases typically get a light broom finish for traction and weather resistance. Decorative options are also available for pads that tie into an existing patio or landscaped area.


Common concrete pad finish options include:

  • Standard broom finish
  • Smooth trowel finish
  • Exposed aggregate
  • Stamped concrete accents
  • Coloured concrete options
  • Sealed concrete surfaces


The right finish depends on how the pad will be used, what sits on top of it, and whether it needs to match or complement existing concrete on the property. We'll walk you through the options before anything gets poured.

Why Concrete Pads and Garage Slabs Fail Early?

Concrete pad problems usually come from one or more avoidable issues.

  • The base was not excavated to the correct depth for the load.
  • The gravel base was too shallow or not properly compacted.
  • Water was not directed away from the slab during or after the pour.
  • The slab was poured too thin for the weight it needs to carry.
  • Reinforcement was skipped or placed incorrectly.
  • Control joints were not cut at the right spacing — so the slab cracked where it wanted to, not where it was planned


That is how property owners end up with cracked garage floors, settled hot tub pads, and shed bases that have shifted out of level — concrete that needs replacing far sooner than it should.


A proper concrete pad starts with the right excavation depth, a correctly prepared base, and a pour thickness matched to the actual load. That is what we do on every job before a single yard of concrete arrives on site.

Why Choose Us for Your Concrete Pad or Garage Slab?

A concrete pad is not a small add-on. It's the base that everything above it depends on — a garage that needs to stay level, a hot tub that weighs thousands of pounds when filled, a shed that needs to stay square for decades. It needs to be done right from the ground up.


You want it to look clean, but you also need it to perform. That means proper excavation depth, compacted gravel base, correct slab thickness for the load, reinforcement where required, expansion and control joints placed correctly, and a finish matched to the use — whether it's a garage floor, a backyard shed pad, or a hot tub slab tied into an existing patio.


As a concrete pad contractor in Stratford, Ontario, we work with homeowners, rural property owners, and businesses to get pad work completed with the right details handled from the start — no shortcuts on the base, no undersized pours, and no guesswork on thickness or reinforcement.

Proper Base Preparation

The durability of any concrete pad depends heavily on what goes underneath it. We take base preparation seriously — correct excavation depth, properly compacted gravel, and graded drainage — because weak prep leads to settling, cracking, and early slab failure.

Clean, Practical Finishes

A garage floor or shed pad needs to be functional above everything else. We help you choose the right finish — broom, smooth trowel, or exposed aggregate — that suits the use of the pad and holds up in every season.

Built for Ontario Weather

Concrete pads in Stratford need to handle snow loads, ice, freeze-thaw cycles, and seasonal ground movement without cracking or shifting. We specify the right mix design and slab thickness for Ontario conditions on every job.

Replacement Advice That Makes Sense

Not every cracked pad needs full replacement. Not every failing slab is worth patching. We assess what's actually going on with the base and give you a straight answer on what makes practical and financial sense.

Local Concrete Service

We serve homeowners, rural property owners, and businesses in Stratford, Perth County, Mitchell, St. Marys, Listowel, and surrounding areas — with concrete pad work built for the conditions local properties actually deal with.

Our Concrete Pad & Garage Slab Process

1

Tell Us About the Project

Start by contacting us with your project details. Let us know whether you need a new garage floor, shed pad, hot tub base, workshop slab, or a pad replacement. Photos and rough measurements are helpful but not required.

2

We Review the Site and Scope

We look at the size and intended use of the pad, current site conditions, access for equipment and concrete delivery, drainage requirements, base depth needed, finish options, and what the slab will need to support.

3

You Get a Quote

Once the project scope is clear, we provide pricing and explain exactly what is included — excavation, base prep, reinforcement, pour thickness, finish, and cleanup.

4

Prep Work Begins

The pad area is excavated to the correct depth, old material is removed where required, the gravel base is installed and compacted, drainage is addressed, and forms are set and checked for level before anything gets poured.

5

Concrete Is Poured and Finished

The concrete is poured, finished to the specified surface, jointed, and left to cure properly. The goal is a clean, solid, correctly built pad that performs for the load it was designed to carry — for decades, not seasons.

Concrete Garage, Shed & Hot Tub Pads in Stratford and Surrounding Areas

Stratford Concrete installs and replaces concrete pads for garages, sheds, hot tubs, workshops, and outdoor structures in Stratford, Ontario and nearby communities.

Service area:


  • Stratford
  • St. Marys
  • Mitchell
  • Tavistock
  • Shakespeare
  • New Hamburg
  • Sebringville
  • Listowel
  • Perth County
  • Huron County
  • Surrounding rural areas


For concrete pad projects outside Stratford, contact us to confirm availability.

Need a New Concrete Pad or Garage Slab?

If your existing pad is cracked, settled, uneven, or no longer fit for purpose, we can help. Send your project details, photos, and approximate measurements to get started.

What Our Customers Are Saying

"Stratford Concrete replaced our old cracked driveway and the difference is huge. The crew was easy to deal with, explained the prep work clearly, and made sure the slope was right for water runoff. The finished driveway looks clean and solid. Very happy with the result"

“We hired Stratford Concrete for a backyard patio and walkway, and everything turned out exactly how we hoped. They helped us figure out the layout, kept the edges clean, and the finished surface looks great with the rest of the yard. It feels like a proper usable outdoor space now.”

“We needed concrete work done around our property for better access and heavier use. They understood what the area needed, handled the site prep properly, and gave us a finished surface that feels built to last. Practical, professional, and no nonsense.”

Concrete Garage, Shed & Hot Tub Pad Frequently Asked Questions

Got questions about concrete pad installation? Here are some frequently asked questions about our services, pricing, and process.

  • How long does a concrete pad last?

    A properly installed concrete pad can last 30 to 50 years, especially when the base is prepared correctly, the slab is poured to the right thickness, and the surface is maintained with periodic sealing. Poor base prep, inadequate drainage, or an undersized pour are the most common reasons pads fail early.

  • Is concrete a good choice for garage floors and shed pads in Stratford?

    Yes. Concrete handles Ontario's freeze-thaw cycles better than most alternatives when it is correctly air-entrained and poured to the right thickness. It is durable, low-maintenance, and provides a stable, level base for structures and vehicles over the long term.

  • What is the best finish for a concrete pad?

    It depends on the use. Garage floors and workshop slabs typically get a broom or smooth trowel finish. Outdoor pads — hot tub bases, shed pads, equipment areas — usually get a broom finish for traction and weather resistance. We will recommend the right finish for your specific project.

  • How much does a concrete pad cost in Stratford?

    Concrete pad installation in Ontario typically ranges from $15 to $30 per square foot depending on size, thickness, reinforcement requirements, base prep needed, and finish type. Contact us for a free estimate specific to your project.

  • Can you replace a cracked or settled concrete pad?

    Yes. We handle full removal of existing slabs, base re-preparation, and replacement pours. If the existing pad has settled, cracked significantly, or is no longer providing a stable base, replacement is usually the better long-term investment over patching.

  • How thick should a concrete pad be for a shed?

    A 4-inch slab on a properly compacted gravel base is sufficient for most residential sheds and smaller outbuildings. For larger structures, heavier storage loads, or vehicle access, 5 to 6 inches with reinforcement is the appropriate specification.

  • What size and thickness does a hot tub pad need to be?

    Most hot tub manufacturers require a minimum 4-inch reinforced concrete pad that extends at least 1 foot beyond the tub on all sides. A filled hot tub can weigh 3,000 to 6,000 lbs — the pad needs to be designed for that load, not treated as a standard patio slab.

  • Can a cracked concrete pad be repaired instead of replaced?

    Sometimes. Surface cracks without structural displacement can often be filled and sealed. Cracks with vertical movement, widespread map cracking, or evidence of base failure generally indicate that the underlying problem cannot be fixed by patching the surface — replacement is the correct solution.

  • What is the standard thickness for a garage floor concrete slab?

    A standard residential garage floor is typically poured at 4 inches for light vehicle use or 5 to 6 inches where heavier loads, multiple vehicles, or workshop equipment are involved. We assess the intended use before specifying thickness on every job.

Get a Concrete Pad Quote in Stratford

Your garage floor, shed base, or hot tub pad should not be something you have to think about after it's poured. If you need a new concrete pad, a slab replacement, or a pad addition in Stratford, contact us today. We will review your project, explain the practical options, and help you move forward with a concrete pad built to carry the load above it — for the long term.

Request a Concrete Pad Quote